RU EN
What is the vacuum table? » Articles » PRINCIPLE OF OPERATION GROOVED VACUUM TABLES

PRINCIPLE OF OPERATION GROOVED VACUUM TABLES

09.12.2014
Technology flute fixing allows to work with, even when coolant through machining. Consumables for grooved vacuum tables are rubber mats transitional flat thickness of 0.5 to 3 mm and used only on the vacuum table flute type. Supplies are readily available.

HOW IT WORKS

Lay flat on the mat vacuum table, covering all grooves. Place the workpiece by means of end stops of adjustable height. Then paint over a path with a normal pen. Remove flat mat and make a hole in the portion corresponding to the actual surface of the fixed workpiece. The holes should be about 2-9 mm in diameter. Flat 3 mm mats have high friction characteristics, relatively high accuracy, can be mechanically obrabotany.Ispolzovanie flute vacuum tables rubber mat allows to drill holes and milled or cut to the contours of the recesses and a depth of 1.5 mm without reducing the vacuum. Since the mat feels heavy wear, it can often be used for blanks with the same circuit. Tolerance to the height of the flat planar mat lies in the range +/- 0.3 mm.


Our company offers a wide range of grooved vacuum table for dimensions and technological performance.
Go to the groove vacuum table

VIDEO: Processing on the grooved vacuum table



Яндекс.Метрика