RU EN
What is the vacuum table? » Articles » PRINCIPLE OF OPERATION LATTICE VACUUM TABLE

PRINCIPLE OF OPERATION LATTICE VACUUM TABLE

09.12.2014
One of the most familiar vacuum fixtures since fixing vacuum ever discovered, is latticed vacuum table.

This type of fixture used to hold workpieces of simple geometric forms.

HOW DOES THIS WORK

Special vacuum sealing cord, laid in accordance with the contour of the workpiece (but includes a channel for vacuum) in the groove trellis table (the required distance on the grid coordinates depends on the workpiece contour and size), thus helping to smooth pronounced uneven or rough surface while the workpiece is secured for machining. We recommend using a vacuum cord diameter larger when large workpiece too rough or uneven. The diameter range of vacuum cords from 3 to 10 mm.


PROCESSING OF GRID VACUUM TABLE

Applied to the metal-working equipment locking system eliminates deflection of thin workpieces that occurs when using clamps, vices and other USP. On a vacuum table can be fixed both magnetic and nonmagnetic materials. Vacuum tables of this type is acceptable to use with cutting fluids.
Lattice vacuum tables are ideal for complex milling, engraving, grinding and not use coolant.


Go to lattice vacuum table Go to lattice vacuum table made of composite material

VIDEO: PROCESSING OF GRID VACUUM TABLE

Processing on the vacuum table trellis faceplate material - aluminum, thickness 12 mm



Яндекс.Метрика