Products

Latticed vacuum table Latticed vacuum table used for clamping simple-shape workpieces.

Grooved vacuum table Grooved vacuum tables is used for holding workpieces with small area of contact (with multiple openings and gaps or tiny items) also providing for cut-through machining.

Combined vacuum tables Combined vacuum tables equipped with reinforcing cage produces vacuum in the numerous chambers between a flat workpiece and rubber frame thus allowing cut-through machining (openings cutting, one-set perimeter machining).

Vacuum porous table This clamping device is made of porous material and intended for fluidless machining of thin sheets, including foils.

VAC&FIX MINI Vacuum Unit Portable unit of 14 m3/h capacity range equipped with battery set and coolant shed of 17 l volume. It is intended to produce vacuum between workpiece and locating plate of the clamping system.

VAC&FIX MAXI Vacuum Unit The portable vacuum unit power range of 21 m3/h to 60 m3/h with a vacuum separator 50 liters of emulsion. Is designed to create a vacuum between the workpiece and the tool support surface.

Sealing cord Material to seal grid-type clamping devices or workpiece contour sealing.

Flat Mats for Grooved Plates Consumables for vacuum grooved plates.

Reinforcing cage Reinforcing cage are the consumables for сombined vacuum tables .

Reinforced Vacuum Hose Durable reinforced vacuum hose.

Vacuum Headers This device allows operation of several vacuum plates connected to single vacuum unit.

Vacuummeters Inspection gage to measure expansion pressure.

Valve Assembly Used to manually shut air suction.

Air Filter Universal air filter.

Coolant Sheds Vessels for vacuum and lubricating and cooling fluid separation.

Automatic vacuum switch Adjustable Vacuum Sensor to set pressure in the vacuum systems. Automatic trip On/Off when set value is reached.

Spare Parts for Vacuum Plates Adapters, collets, wrenches, etc.

Repair kits Repair and maintenance kits are intended for routine maintenance of vacuum pumps and pumps.

VAC&FIX MAXI Vacuum Units with Increased Vacuum Capacity The vacuum unit power range from 106 m3/h to 305 m3/h and with a vacuum accumulator coolant separator from 100 to 500 liters. Is designed to create a vacuum between the workpiece and the tool support surface.

Radial Vacuum Units Vacuum units used to produce vacuum in the vacuum plates with extensive vacuum loss.

Sinus vacuum table Sinus grooved vacuum table, for fixing workpieces with a small contact area (small parts, blanks with a large number of apertures and windows) as well as the possibility of conducting through the workpiece, and machining the workpiece at an angle.